Cre8 Joinery Solutions is back with a bang!

Sat, 2013-11-30

Joinery fit out contractor to the commercial sector, covering London and the UK, Cre8 Joinery has become a veritable hive of activity, not only recruiting several key new members of staff these past few months but also continuing to make sizeable investments in equipment and software to improve its service.
 
Continuing to invest, continuing to grow
A case in point is a new Beam Saw at a cost of £200,000, whilst implementing Solidworks’ 3D CAD drawing package likewise saw a considerable outlay being made.
 
This is on top of financial investments were made in high-end 'bisTrack' management & manufacturing software at the start of the year. Cre8 Joinery has been using the high-end software to also help control costs, stock, and of course, assist in the elimination of waste. At the same time we have upgraded our computers and are repaying our investment by producing cutting lists and material take-offs, thus reducing time and waste on materials.
 
Further additions to the business have included a second 300KW Biomass Boiler, therefore bringing the total power to 600KW. Cre8 has also upgraded its shedder, previously capable of processing 300KG an hour, to an Austrian Untha shredder capable of doing up to 1000KG an hour.
 
Our offices and additional workshops are now all centrally heated, whilst the installation of two generators means that even with national power cuts the business can continue to operate at full capacity. A case in point: new diesel tank storage allows these generators to function for up to four weeks. Continuing to be eco friendly and energy efficient, the existing 200KW diesel heater is now redundant as Biomass will take over.
 
Furthermore Cre8 Joinery now has a backup LPG boiler for if the Biomass boiler does ever breakdown, as well as a heated flammable paint store for all our flammable lacquers and paints, plus a new flammable waste store.
 
As if this wasn’t enough to suggesting a thriving business, we now also have a new cross cut guillotine and a new long cut guillotine, as well as a veneer stitcher, plus a 1300mm wide Calibrating sander.
 
To keep things on the move we have further invested in a new 3.5 tonne forklift, whilst a new 2000 square foot warehouse is being constructed which will be used for storage and goods that are ready to be shipped out. The roof is already half on!
  
Finally for now, we are currently installing a 35KW Invertor controlled rotary screw compressor. This will save up to 35% on our energy needs when producing our compressed air for our manufacturing processes.
 
With the above new investments costing something in the region of £116K, added to our new beam saw this brings Cre8’s total investment in crucial new equipment to around £316K.
 
 

The joiners you can trust for a perfect finish

 
The go-to joinery firm of choice when working with local authorities and big name main contractors including Morgan Lovell, Margolis, Bluu Solutions, Maris Interiors, Kier Group and Lakehouse, Cre8 Joinery Solutions has also recently completed an office refit for Maris Interiors, located at the prestigious address of 10 Portman Square Central London. This is the base of Aramco Overseas Company UK Ltd.
 
Our brief was to create signature bespoke joinery to help enhance the beautiful spaces, office environments and at the same time show off signature features around the development. This included everything from desk furniture and prestigious boardroom tables, to art installation cabinets, wall fitments, doors and washroom cubicles. 
 
The overall effect is a wonderful integrated office environment over two floors that creates a calm but business-like atmosphere using our quality bespoke joinery and stunning office furniture and fitments.
 
From reception counters to wall panels, when it comes to an office fit out that raises the benchmark, Cre8 Joinery can make it all happen and ensure a perfect finish to the job.
 
In association with the Washroom side of our business we are additionally working on, or have recently completed, the following projects for the following contractors:
 
For Bouygues UK, project at Queen Victoria Street, London, fitting washroom areas to all eight floors (current value £781K with a completion date of January 2014)
 
For Stortford Interiors / Structuretone, a project at Victoria Embankment, London, fitting washroom areas to seven floors (current value £685K, on site at present with a completion date of February 2014)
 
For Kier London, a project at North Middlesex Hospital, Edmonton, London (with a current value of £680K) providing washroom/joinery works to Tower Building. The Cre8 team is on site at present, looking at a completion date of April 2014.
 
For Morgan Sindall, a project with a current value of £560K.
 
Projects recently completed by Cre8 and Washroom include:
 
MITIE Interiors at Queen Street, London, where washroom areas were fitted to seven floors (a job value of £288K)
 
Stortford Interiors at Wigmore Street, London, where washroom areas were fitted to six floors (at a value of £380K)
 
Paragon Management at Wood Street, London, where washroom areas were fitted to nine floors at a value of £278K
  
Vinci Interiors in Abbey Gardens, Reading, where washroom areas were fitted to seven floors (a job value of £180K)
  
Gaybank Construction for BNP Paribas, Harewood Avenue, where washroom areas were fitted to five floors (a job value of £140K)
 
 
 

NEW! Approved applicator of Metalier

 
Further new Cre8 Joinery news includes the fact that it has become an approved applicator of Metalier, a spray liquid metal made from metal filings that, when applied to a surface such as MDF or plywood forms a 1mm thick steel layer. The results, as our pictures show, are simply stunning.
 
 

About Cre8 Joinery Solutions

 
Staffed by our team who can truly call themselves experts in their field, we’ve been producing bespoke joinery on demand throughout London and the UK for more than a decade, meeting any project challenge by devising a stylish high end joinery solution. These include:
 
• Bespoke joinery services

• Office fit outs

• Refurbishment

• Storage solutions

• Reception counters
• Glass panelling

• Wall panelling 

 
At Cre8 Joinery Solutions, no job is too big or too small. From city boardrooms to staff rest areas, from shop counters to personal effects lockers, from storage wall to full office fit out and refurbishment, Cre8 Joinery Solutions caters for them all, throughout London and the UK.
 
From design concept, Solidworks 3D render or Auto Cad Drawings to supply and installation, we offer a first class one-stop shop.
 
Call us on UK 0800 999 8888 and we can Cre8 the perfect match for your needs.
 
Cre8 Joinery Solutions: Bespoke Joinery On Demand.
Visit our new website NOW at www.cre8joinery.co.uk
 
 

Don’t forget: Follow Cre8 Joinery on Twitter, Facebook, YouTube & LInkedIn

 
You can follow what Cre8 Joinery Solutions is up to any time of the day or night by paying us a visit on Facebook and Twitter.
 
Follow us on Twitter by visiting www.twitter.com/cre8joinery
 
‘Like’ us and befriend us on Facebook at www.facebook.com/cre8joinery
 
Also providing inspiration and visual updates on recent projects is our very own YouTube channel.
  
To watch the Cre8 Joinery Solutions videos that have been uploaded to date, visit http://www.youtube.com/watch?v=zp0MJ_LrIr0 to see what has got our industry talking.